Hoodlum

Hoodlum

This extension allows you to run the deck lid spring when using the deck lid stand offs.... Click here for more information

Starting at: $24.95


Cam Followers (Stock Lifters) (Type 4)

These ride against the cam. We prefer the Mahle or Scat brand for the upright engines. We personally have had bad luck with regrinds. If you are going to use used ones, clean the head surfaces and put two together with the faces touching. Hold them up to a light to see if you can see light between them increasing from the middle out. In other words the heads should be convex not concave or flat. Note: When installing, make sure your cam has .060 to .100" clearance from the top of the cam lobe to the lifter. Install using cam assembly lube.

Cam Followers (Stock Lifters)
Add to cart

Each

40hp-1600

These ride against the cam. We prefer the Mahle or Scat brand for the upright engines. We personally have had bad luck with regrinds. If you are going to use used ones, clean the head surfaces and put two together with the faces touching. Hold them up to a light to see if you can see light between them increasing from the middle out. In other words the heads should be convex not concave or flat. Note: When installing, make sure your cam has .060 to .100" clearance from the top of the cam lobe to the lifter. Install using cam assembly lube.
113 109 309C: $8.95