Hoodlum

Hoodlum

This extension allows you to run the deck lid spring when using the deck lid stand offs.... Click here for more information

Starting at: $24.95


Flywheel Gland Nut (Type 3)

It's really a bolt, but that's what everybody calls it. This bolt holds the flywheel on. If you are using an old one make sure the needle bearings in the pilot bearing are still in the end and that it's not rusted. Note: This bolt should be put on with a torque wrench and not a breaker bar with someone jumping off the roof. Impact guns are out too! Torque the bolt to 250 ft. lb., anything less and it will come loose. Anything more and you run the risk of cracking the bolt and having the flywheel fall off.

Flywheel Gland Nut
Add to cart

Flywheel gland nut

36hp-1600

It's really a bolt, but that's what everybody calls it. This bolt holds the flywheel on. If you are using an old one make sure the needle bearings in the pilot bearing are still in the end and that it's not rusted. Note: This bolt should be put on with a torque wrench and not a breaker bar with someone jumping off the roof. Impact guns are out too! Torque the bolt to 250 ft. lb., anything less and it will come loose. Anything more and you run the risk of cracking the bolt and having the flywheel fall off.
111 105 305E: $15.95

 

Flywheel Gland Nut
Add to cart

Replacement bearing

All

It's really a bolt, but that's what everybody calls it. This bolt holds the flywheel on. If you are using an old one make sure the needle bearings in the pilot bearing are still in the end and that it's not rusted. Note: This bolt should be put on with a torque wrench and not a breaker bar with someone jumping off the roof. Impact guns are out too! Torque the bolt to 250 ft. lb., anything less and it will come loose. Anything more and you run the risk of cracking the bolt and having the flywheel fall off.
111 105 313A: $6.50