Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N141212
These are the latches that hold the popout frame out.
Application:There are 37 products.
Part #: 311401301C
Lower Outer Needle Bearing For Front Beam (2 required)
Application:Part #: 1401024
Beam Mounting Brackets
Application:Part #: 111899123A
This is a little rubber pad that goes on the front beam where you attach the beam to the body.
Application:Part #: 111498001
Front axle lock plate kit
Application:Part #: 1401021A
This is the way to go if you want an adjustable front beam.
Application:Part #: 1401021B
This is the way to go if you want an adjustable front beam.
Application:Part #: 1401023
If the front end of your car sits further down then the rear end, caster shims will help by pushing out the bottom of the beam.
Application:Part #: 1401022
If the front end of your car sits further down then the rear end, caster shims will help by pushing out the bottom of the beam.
Application:Part #: 111405273
These are the rubber snubbers that are in between the front torsion bar arms.
Application:Part #: 1405273RD
These snubbers last a lot longer than stock snubbers.
Application:Part #: 111513475A
Shock Absorber Bolt see Description for all locations it fits
Application:Part #: 111401301
Front Axle Needle Bearing
Application: