Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:
This kit allows you way to bolt on disc brakes to the front of your king and link pin front end. Bolt Pattern is 5x112
This kit allows you way to bolt on disc brakes to the front of your king and link pin front end. Parts that you will need to finish out the kit are rotors, caliper, lug nuts and caliper mounting bolts off of a 73-79 bus. This kit comes with hubs, caliper brackets, seals, lock tabs, and bolts to mount the caliper bracket. If your bus is a 66 or earlier you will also need the master cylinder kit. We suggest you use a 15" rim with this kit since it will allows you to use the flat steel adapter. 14" stock wide five bus rims will hit the caliper. Bolt Pattern is 5x112.
Bus (Type 2): 55-62
No customer reviews for the moment.
Part #: 113837239BCM
This is the trim piece that goes around the inside front door handle.
Application:Part #: JC22970
Jaycee Billet Full Flow Pump Cover w/ -8 O-ring Fitting, Red
Application:Part #: 113198700
Dual Port Manifold End Castings - Pair
Application:Part #: 141867500
This is the vinyl covering for the inside roof and sides of the Ghia.
Application:Part #: 043131599A
This is a smog device.
Application:Part #: 1411300D
These heavy duty sway bars help eliminate swaying.
Application:Part #: 151871371A
These pins position the top into the front windshield post..
Application:Part #: 111821707BTQ
This is the beading that goes between the fender and the body.
Application:Part #: 1105279
This gasket is only used if you're having problems with your end play.
Application:Part #: 211259283
Accelerator Push rod to lever, Spring, each 2 Required
Application:Part #: 1847100CWG
This Bug Safari window is constructed as a dual-channel, mild-steel frame with a chrome finish that accepts 3/16" safety glass and an outer lip seal. This chrome options arrives pre-assembled
Application:Part #: N139401
Side Reflector Screws, sold as a pair
Application:Part #: 311845121CCL
This seal goes around the front window.
Application:Part #: 6707102
These bumpers are made for Baja Bugs.
Application:Part #: 1701062
These pans will replace those rusted out parts of the front or rear floors.
Application:Part #: 1198092BCH
92mm Pistons & Cylinders set with a 82mm Stroke CHINA
Application:
This kit allows you way to bolt on disc brakes to the front of your king and link pin front end. Bolt Pattern is 5x112
