Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:This kit contains most of the seals and gaskets necessary to rebuild an engine.
This kit contains most of the seals and gaskets necessary to rebuild an engine. You'll also need to purchase a flywheel seal. If your case is a dual relief motor, you'll also need another copper o-ring for the second relief plug and two more of the oil cooler seals. Note: We use a sealer called Gasgacinch on all our gaskets.
Bug (Type 1): 61-65
Bus (Type 2): 60-65
Ghia: 61-65
No customer reviews for the moment.
Part #: N104701
These are the bolts that hold the engine in.
Application:Part #: N105001
These are the bolts that hold the engine in.
Application:Part #: 111115421
Oil Relief Valve Spring 25-36 HP
Application:Part #: 1101030
Included in this kit are the bolts, nuts and washers required for "out to head" assembly of the engine..
Application:Part #: 1198035
If you are converting a single port engine to a dual port or if you have a brand new case; these are the head studs you're looking for.
Application:Part #: 040101157
This plug goes in the back of the case (flywheel side).
Application:Part #: 111199101
These are the bolts that hold the engine in.
Application:Part #: N110085
Some of the more common nuts you might need..
Application:Part #: N0145051
Some of the most common studs you might need.
Application:Part #: 111199102
This nut came on all dual relief cases.
Application:Part #: 1101211
This chrome stand dresses up your engine.
Application:Part #: 043101025
We only carry NEW dual relief cases. Limited supply!
Application:Part #: 1198035C
Chromoly 8mm Head Stud Kit
Application:Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1101461KIT
This kit has the correct studs for a dual port engine to hold the heads on. 10mm
Application: