Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N141212
These are the latches that hold the popout frame out.
Application:This is a little rubber pad that goes on the front beam where you attach the beam to the body.
This is a little rubber pad that goes on the front beam where you attach the beam to the body. They are located under the gas tank (except Bugs-58). You will need to put them on the two threaded nuts that are part of the beam, then mount the beam. Put the other two pads on from the gas tank side and then the plates and bolts. One pair does one side, you will need to order two pairs for the car.
Bug (Type 1): All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: JC44580
Jaycee Stack Screens (Pr)
Application:Part #: 6517283002
These conversion flanges will allow you to run bigger stronger Bus or 930 CV joints..
Application:Part #: 1251000CC
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 1115610RD
Billet Dipstick, Red
Application:Part #: 112701062B
Floor Plate, Right
Application:Part #: 1601153
Replacement Cap, EMPI Logo, Push-On Chrome, 5/8" Inside Height
Application:Part #: 211817567
Gutter, Rear Corner fits both sides
Application:Part #: 141971114
The electrical harness runs everything on the car.
Application:Part #: 1711110A
This kit mounts under your stock shifter to shorten the throw.
Application:Part #: 111863157
Wire Harness Clip, Each
Application:Part #: 111945121B
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: 311109601
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.
Application:Part #: 02110529124
Endplay Shim .24mm
Application:Part #: 211817539
Inner Roof Strength Panel 2.5 Meters (98")
Application:Part #: 111857101K
Glove Box, made of Paperboard like OE style
Application:Part #: 133809021BX
Front Wheel House, Lower Rear Section
Application: