Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N141212
These are the latches that hold the popout frame out.
Application:Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard.
Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard. So, here's the answer. Put lowered spindles on your bug or bus and it will ride like it did stock. The bug spindles come with a 2 1/2" drop and the bus with a 3 1/2" drop. On the king and link bug spindles you can get spindles only or have us install the king and link pins. Those of you with 66, 67 bugs will have to change the outer tie rod end to 68 and later. On the bus spindles they only come with the king pins rebuilt. Also on the bus spindles you will need a tie rod with ends from a 1968-1979 (part number 211 415 801F). This is necessary to give more frame clearance. These spindes are cast not welded. Sold in pairs and some on an exchange basis.
Bug (Type 1): -65
Ghia: -65
No customer reviews for the moment.
Part #: 113105277
These pins hold the flywheel in place on the crankshaft.
Application:Part #: 831837565
This rubber piece holds the front door window in it's sash.
Application:Part #: 211255719F
Heater Tube Insulating Cover, Pipe to Heater Box
Application:Part #: W8CC
When replacing these use anti-seize on the threads.
Application:Part #: 151837035C
The striker is what keeps the door closed, an absolute necessary part to say the least.
Application:Part #: 141953517FGR
This switch tells the flasher which way to send the current. German
Application:Part #: 3881214
We really like the style and comfort that these seats provide.
Application:Part #: 133412365
This is the spacer that goes on the front strut of a Super Beetle 74-79
Application:Part #: 1105305R
This is a large thrust surfaced gland nut made out of chromoly.
Application:Part #: 211813164M
This is what the battery sits on.
Application:Part #: 151701061B
Floor Plate, Left, Convertible only
Application:Part #: 113798074
This is the pin and the spring needed on the accelerator pedal.
Application:Part #: 311141025C
The clutch cover is also known as a pressure plate.
Application:Part #: 211698001B
Metal Brake Line kit
Application:Part #: 141953165C
This seals the front turn signal housing from the fender.
Application: