Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard. So, here's the answer. Put lowered spindles on your bug or bus and it will ride like it did stock. The bug spindles come with a 2 1/2" drop and the bus with a 3 1/2" drop. On the king and link bug spindles you can get spindles only or have us install the king and link pins. Those of you with 66, 67 bugs will have to change the outer tie rod end to 68 and later. On the bus spindles they only come with the king pins rebuilt. Also on the bus spindles you will need a tie rod with ends from a 1968-1979 (part number 211 415 801F). This is necessary to give more frame clearance. These spindes are cast not welded. Sold in pairs and some on an exchange basis.
All steering box cores must be sent first, before we can send you a rebuilt one. Our stock on these are so low that we cannot chance people not sending cores back. Your box must be and “F” box for 68-72 or a “ZE” or “ATE” box for 55-67. We cannot use any other cores, so please check that you have a rebuildable box before sending.
For all other cores, you have two options. You can send in your core first to avoid having to pay the core fee up front when ordering, or, you can pay the core charge and when we get your core in we will credit you back. You can choose to have it refunded to your card or you can have it put as credit on your account toward future purchases. When sending your core to us, please include your full name and telephone number.. You may choose to have your specific item rebuilt and sent back to you, but that must be made apparent when you send in your core.
We will call you after we have received and reviewed your cores. Most of the cores we receive are rebuildable, however, there are a few that are not able to be rebuilt. We will let you know when we call you whether yours are rebuildable or not, and figure out the next step.
Some reasons why your item might not be accepted:
Steering Boxes:
- Bent steering shaft 55-62
- Completely rusted, won’t turn
- Peg & worm destroyed
Spindles:
- Worn out king pin housing
- Bent spindle
- Spindle threads hammered, cut, or modified
Ball Joints:
- Bent
- Bearing surface pitted/destroyed
IRS:
- Bearing surface too bent, modified, broken.
There may be an additional fee if your item is damaged, yet salvageable/repairable.
Steering boxes that are not usable will be sent back and you will need to find another usable core before you can purchase a rebuilt box.
Bus (Type 2): 63
No customer reviews for the moment.
Part #: 1401022
If the front end of your car sits further down then the rear end, caster shims will help by pushing out the bottom of the beam.
Application:Part #: N0138152
Also a gasket of sorts.
Application:Part #: 152823509B
The hood catch is what the pin of the hood latch goes into.
Application:Part #: 111837209B
This seal goes between the handle and the body.
Application:Part #: 211609185A
Brake Leaf Spring Front or Rear
Application:Part #: 311405371WG
These are reconditioned arms with new ball joints pressed in. They are sold on an exchange basis. We will not ship out your reconditioned Ball Joint Arms until we receive your old arms in good rebuildable condition.
Application:Part #: 6498210
If you are going to play in the dirt and don't want to bend your spindles, this gusset kit will help strengthen them.
Application:Part #: 133419804A
These two rods go from the steering box on a Bug, to the spindles, making the car turn.
Application:Part #: 111813311
Channel, Hood and Engine Weatherstrip, 43" Length
Application:Part #: 111837501K
This is the mechanism that makes the window go up and down.
Application:Part #: 1601140BRMC
Chrome Low Cap Only for BRM, EMPI + Speedwell Wheels
Application:Part #: 113609537B
These shoes or linings are in the rear drums and are new, so no exchange.
Application:Part #: 111115107AHD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 211805041
Lower Nose Repair Panel, 500mm tall
Application:Part #: 211863162
These are the interior panels.
Application:Part #: 111941341
This plug has three wires on it that plug into the headlamp.
Application: