Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:This plate goes between the two nuts on each of the front spindles.
This plate goes between the two nuts on each of the front spindles. It is bent to lock the nuts keeping them from spinning. Install the first nut, the plate, and then the outer nut. Tighten the outer nut against the plate making sure you don't spin the inner nut. Use a large pair of channel locks to bend one tab against the inner nut and the remaining tab against the outer nut. Note: This plate should be replaced every time you pull the drum off.
No customer reviews for the moment.
Part #: 111837595A
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 002301189C
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 111857001A
Bug Dashboard Repair Section
Application:Part #: 1721315
This chrome and rubber pedal pad kit fits over your stock pedals.
Application:Part #: 1501613
We make wheel adapters for some of the more common drums and wheels.
Application:Part #: 113707155B
These are the guards on the front and rear bumpers.
Application:Part #: 2711099PL
Gear shift extensions angle back and add about 5" of length to your stock shifter, which allows you to reach the shifter without leaning forward..
Application:Part #: 1881020
We really like the style and comfort that these seats provide.
Application:Part #: 211843108A
Lower replacement pieces for the side cargo doors.
Application:Part #: 131405669
This nut holds the front drum on.
Application:Part #: 371881953
Front Seat Pivot Bolt
Application:Part #: 211405625
These bearings go in the drum or rotor hub to allow them to spin.
Application:Part #: 111101461
These nuts and washers hold the heads on.
Application:Part #: 113863345A
Hand Brake Securing Ring
Application:Part #: 111971108
The electrical harness runs everything on the car.
Application:Part #: 211609439D
Rear Backing Plate Left
Application:Bus (Type 2); 68-70