Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N141212
These are the latches that hold the popout frame out.
Application:These are the three pieces of tin that go on the back of the generator or alternator.
These are the three pieces of tin that go on the back of the generator or alternator. Install the flat backing plate on first with the hole down. Then place the small ring on top of that and then the last piece with the vent facing down. When you install the generator into the fan shroud, the wiring posts should be at 2 o'clock. For alternator or 30 amp 12v generators only.
No customer reviews for the moment.
Part #: 143845521CAM
This seal is for the rear window.
Application:Part #: 113915305
Battery Mounting Strap
Application:Part #: 1105401A
These connecting rods are longer than stock.
Application:Part #: 021115487
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 1117011
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: 111945263F
Taillight Bulb Holder, each
Application:Part #: 343201551C
Locking Gas Cap
Application:Part #: 2117006
This hose adapter takes the place of the stock oil filter and allows you to run external oil coolers.
Application:Part #: 151853325A
These chrome moldings for American style seals go around the windows and are just for looks.
Application:Part #: 113837639
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: 1129515PR
Linkage Down Rod Extensions, Short & Long, Pair
Application:Part #: 211707136A
Front Bumper Bracket, Right
Application:Part #: N121051
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 111837476B
The front door window rolls up and down between these two rubber seals.
Application:Part #: 6823565
There are two types of hold downs, rubber and steel.
Application: