Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N141212
These are the latches that hold the popout frame out.
Application:These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
These locks keep the vent wing closed, therefore a must, but they're a pain to replace. Start by removing the glass and rubber. Use a 1/8" drill and drill out the original rivets. Next, remove whatever is left of the old lock and install the new lock. Using 1/8" pop rivets, install the head of the lock from the frame side. With a hammer and dolly, very carefully flatten what's left of the rivet on the latch side. Now replace the glass and rubber.
Bug (Type 1): left,56-64, Conv.,56-64
Race/Off-Road: left,56-64
No customer reviews for the moment.
Part #: 6801207
Universal Reservoir Mount Tab, Each
Application:Part #: 6703020
4 Point Show Bar Unassembled
Application:Part #: 213707425
Rear Bumper Guard Support Tubes, Pair
Application:Part #: 117877223C
These are all of the parts that we can get our hands on for metal sunroof bugs.
Application:Part #: N203501
Brake fluid hose.
Application:Part #: 186361211
These ride on the tunnel from the shifter forward.
Application:Part #: 211611069C
This hydraulic slave cylinder is found in the front brake backing plate.
Application:Part #: 111863412
This carpets the area behind the rear seat.
Application:Part #: 1903141
This chrome strap holds the alternator or generator to the stand.
Application:Part #: 113903515
These are the bearings and brushes for your generator.
Application:Part #: 2817021
This is a deluxe cover, not a cheap cover.
Application:Part #: 211255717
Heater Tube Insulating Cover, Front 2 Pieces
Application:Part #: 651300422
Suspension Limit Straps 22", Pair
Application:Part #: 211798005
Splash Pan Installation Kit
Application:Part #: 6251004
A stinger (depending on your motor combo) makes horsepower at 5K RPM and above.
Application: