Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N141212
These are the latches that hold the popout frame out.
Application:These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
These locks keep the vent wing closed, therefore a must, but they're a pain to replace. Start by removing the glass and rubber. Use a 1/8" drill and drill out the original rivets. Next, remove whatever is left of the old lock and install the new lock. Using 1/8" pop rivets, install the head of the lock from the frame side. With a hammer and dolly, very carefully flatten what's left of the rivet on the latch side. Now replace the glass and rubber.
Bug (Type 1): 68-79
Race/Off-Road: 68-79
No customer reviews for the moment.
Part #: 1721315
This chrome and rubber pedal pad kit fits over your stock pedals.
Application:Part #: 211609439A
Rear Brake Backing Plate, Left
Application:Part #: 1251159
Black Street Stinger with swivel flange
Application:Part #: 113857551EBK
These are the visors you pull down to keep the sun out of your eyes.
Application:Part #: 113101355A
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1105273BR
Lightened 12 lb.
Application:Part #: 113105231B
This gear matches up with the brass gear that is on the crank.
Application:Part #: 6129650476BK
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element.
Application:Part #: 211609440D
Rear backing plate right.
Application:Bus (Type 2); 68-70
Part #: 251615123CCO
Front calipers hold the brake pads that stop the rotor, which in turn stops your vehicle.
Application:Part #: 2711102
The aftermarket shifters listed here, shorten the shift pattern considerably.
Application:Part #: 151857552EWH
These are the visors you pull down to keep the sun out of your eyes.
Application:Part #: N90168301
Cylinder Base O-Ring
Application:Part #: 6711177C
A great shifter and a must for mid-engine sand cars.
Application:Part #: 113853535B
This is the chrome trim that went on the front and sides of the Bug to dress it up.
Application:Part #: 6415063
It's super compact, light weight and easy to mount on Buggies or Sand rails.
Application: