Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N141212
These are the latches that hold the popout frame out.
Application:These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
These locks keep the vent wing closed, therefore a must, but they're a pain to replace. Start by removing the glass and rubber. Use a 1/8" drill and drill out the original rivets. Next, remove whatever is left of the old lock and install the new lock. Using 1/8" pop rivets, install the head of the lock from the frame side. With a hammer and dolly, very carefully flatten what's left of the rivet on the latch side. Now replace the glass and rubber.
Bus (Type 2): 68-79
Type 3: 68-73
No customer reviews for the moment.
Part #: 251837704
The front door window rolls up and down between these two rubber seals.
Application:Part #: 6801202
These tabs are used for mounting just about anything to tubing..
Application:Part #: 6401234
These go from the front beam to the belly pan to strengthen the front beam area.
Application:Part #: T1129306
This is a great way to get larger jets with out having to buy a lot of new jets.
Application:Part #: 113407361E
These joints are located in the ends of the control arms.
Application:Part #: 151863011
These are the interior panels.
Application:Part #: 02007
These are the parts found in the distributor.
Application:Part #: 68012004
Set of 4 Universal Mounting Tabs with 1/2" hole
Application:Part #: 211498171A
This pin and its bushings are housed on the front side of the front axle beam in a box.
Application:Part #: 211703120AX
This is where you would put in the stock jack to jack up the bus.
Application:Part #: 113853240
These are the three pieces of chrome that run along the dash.
Application:Part #: T1401022
This is a great way to tow your car.
Application:Part #: 2881404CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 113129191G
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 1885403CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application: