Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:
On Bugs up to 1967 and on Buses up to 1963 you will need to push back the small plastic bezel.
On Bugs up to 1967 and on Buses up to 1963 you will need to push back the small plastic bezel. You will see a pin coming in from the side. Use a small punch or a nail with the head removed to drive the pin out. We suggest you do this in a clean area because the pin usually flies out and you will want to be able to find it. Once the pin is out, wiggle the handle and it will come off. On 1968 and later cars, you will need to pry out the plastic cover that is over the handle. Behind it you will need to remove the phillips screw. The handles that fit the Vanagon (#321 837 581) will work on the 68 and later Bugs, Buses and Type 3's and are a heavier duty than the stock one.
Bug (Type 1): 68-79
Bus (Type 2): 68-79
Type 3: 68-74
Ghia: 68-74
Race/Off-Road: 68-79
No customer reviews for the moment.
Part #: 4881213
We really like the style and comfort that these seats provide.
Application:Part #: 251807123A
these plastic caps mount on the ends of the later year bumpers..
Application:Part #: 1501602
We make wheel adapters for some of the more common drums and wheels.
Application:Part #: 2847102SS
This makes the rear window pop out like the front windows.
Application:Part #: 213707666
Splash Pan to Bumper Bracket, Rubber Pad, Set
Application:Part #: 131405129
These seals go around the arms to keep the dirt out of the front beam.
Application:Part #: 211945241R
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: 211703509B
Accelerator Cable Guide Tube
Application:Part #: 211809502B
This is the front wheel arch.
Application:Part #: 6251014M
SS Racing Muffler Only with Mounting Clamps
Application:Part #: 1601154
Cap Only with EMPI Logo Push-On Chrome Plated Plastic with Ring
Application:Part #: 311501283
If a rear axle bearing is bad, you will have excessive play in the rear wheel.
Application:Part #: 211711195
Shift Rod Guide Tube
Application:Part #: N113891
Fuse Box Screws (2) and Dome Light Screws
Application:Part #: 251829331B
This strut is what holds up the rear hatch of you Vanagon.
Application:
On Bugs up to 1967 and on Buses up to 1963 you will need to push back the small plastic bezel.
