Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:
These handles go on the inside of the front doors to open them.
These handles go on the inside of the front doors to open them. On bugs up to 1967 and on buses up to 1963 you will need to push back the small plastic bezel. You will see a pin coming in from the side. Use a small punch or a nail with the head removed to drive the pin out. We suggest you do this in a clean area because the pin usually flies out and you will want to be able to find it. Once the pin is out, wiggle the handle and it will come off. On 1968 and later cars, you will need to pry out the plastic cover inside the lever. Behind it you will need to remove the phillips screw. Then take the door panel off. There are two 10mm headed bolts that hold the latch on.
Bug (Type 1): 67-79; Conv. 74-79
Type 3: 68-73
Ghia: 67-74 (Dual screw mount only)
Race/Off-Road: 67-79
No customer reviews for the moment.
Part #: 113881607A
This knob and guide allows you to release the back of the front seat.
Application:Part #: 111863706
This is a full carpet kit.
Application:Part #: 6501149100K
These boots and flanges are designed for axles with very long suspension travel.
Application:Part #: 111198003
This kit contains most of the seals and gaskets necessary to rebuild an engine.
Application:Part #: 211711169A
This coupler attaches the shift rod to the transmission.
Application:Part #: 211837813A
Front Door Sliding Window Latch Plates, Stainless Steel
Application:Part #: 6801240
Universal Billet Support Bracket, 1 1/2" clamps, measures 4 7/16"L x 3"H x 2 1/2"W
Application:Part #: 211801071A
A panel that is right behind the front tire.
Application:Part #: 151871359B
These strips screw to the top.
Application:Part #: 1823319
These replace the stock front hood spring with a gas charged strut.
Application:Part #: 111941111
This chrome metal ring goes around the headlight.
Application:Part #: 111813305
Rear Apron Catch Plate
Application:Part #: 1251210
These are two of the different types of exhaust nuts.
Application:Part #: 111943023B
This housing mounts on the deck lid to hold the light assembly for the license plate.
Application:Part #: 6129650476BK
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element.
Application:
These handles go on the inside of the front doors to open them.
