Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:The door lock mechanism holds the door closed.
The door lock mechanism holds the door closed. To remove the old mechanism you'll need to take the door panel off and basically gut the inside. Peel the door rubber from the door jam and remove the Phillips screw(s) that hold the handle in. Look for the three Phillips screws that hold the mechanism in and remove them. Now remove the clip that holds the inside handle rod to the mechanism. Next, take out the window (yeah, I know it's a pain). Then look at the metal channel that the felt sits in. Peel the felt up a little at the bottom and you will see a 10mm headed bolt that has to be removed. Remove the bolt and push up on the channel and it will come out. At this point, fish the lock mechanism out. To install the new mechanism, go in the reverse order.
Bug (Type 1): 60-64
Race/Off-Road: 60-64
No customer reviews for the moment.
Part #: 113611195
This boot is on the plunger end of the master cylinder, keeping dirt out of the master cylinder..
Application:Part #: 113115175
This screen fits in the sump around the pick up tube.
Application:Part #: 1119029
Remote coil mounts are used when you want to keep the coil on the motor, yet out of the way of down linkage on dual carburetors..
Application:Part #: 113698273
This kit is for rebuilding the wheel cylinder.
Application:Part #: 261809251A
B Post Outer Section Without Left Storage Compartment 550mm (21.65")
Application:Part #: 221883419
Middle Seat Floor Mount Reinforcement Plate, Welds onto floor and supplies support for mount
Application:Part #: 211703651
Rear Apron Mount Bracket, Left
Application:Part #: 111119123A
Cooling Fan Hub
Application:Part #: 111863410
This carpets the area behind the rear seat.
Application:Part #: 211863711A
This rubber mat goes on the front floor.
Application:Part #: 4881215
We really like the style and comfort that these seats provide.
Application:Part #: F1102
These are the glues and oils we use..
Application:Part #: 1601027BK
These are the most popular five lug mags wheels.
Application:Part #: 111821306M
These are new rear fenders.
Application: