Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N141212
These are the latches that hold the popout frame out.
Application:These carpet kits are to be used with the original rubber floor mats.
These carpet kits are to be used with the original rubber floor mats. The part numbers are just the basic numbers so you will need to tell us what color you want and what kind of material. There are three styles to choose from; loop, cut pile, and square weave. Brought to you proudly by TMI. Note: Buy a can of 3M spray adhesive. Pay attention when using this. Once it is stuck that's it. **Please call for current prices**
Bug (Type 1): 73-77
No customer reviews for the moment.
Part #: 113955541BBK
Wiper Switch Knob, includes Center Button
Application:Part #: 1109616
Single Spring Shims, .030" 8 piece
Application:Part #: 111863411
This carpets the area behind the rear seat.
Application:Part #: 241707420
Bumper Rubber Insert for Deluxe Bus Bumpers
Application:Part #: 221863021
This is a full carpet kit.
Application:Part #: 141012900
A broken one can give bad reception and a coat hanger isn't much better.
Application:Part #: 6498051A
EMPI Chromoly Link Pins 5/8", Set of 4
Application:Part #: 113798054R
Stainless Steel Rear Bumper Overrider Set
Application:Part #: 1105182C
82 C/W Crank w/ Chevy Journals
Application:Part #: 151871196A
This is the pad between the top material and the headliner.
Application:Part #: 113853559B
These are the clips that hold the various chrome moldings on.
Application:Part #: 1129718
These gaskets are for upright dual port engines.
Application:Part #: 211415802F
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 111498051AGR
This kit contains the pins, bushings and shims that attach the spindle to the axle beam on king and link pin front ends.
Application:Part #: 211721351A
This pin goes on the front end of the clutch cable and should be replaced when you replace the cable.
Application: