Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:ECP part numbers are for the regular crimp style electrical ends.
ECP part numbers are for the regular crimp style electrical ends. ECX part numbers are the factory style ends. You will need a special pair of pliers (see ELECTRICAL END PLIERS in TOOL SECTION) to install ECX ends. The ECX are better than the regular crimp ends.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 113915305
Battery Mounting Strap
Application:Part #: 261813356E
Truck rear corner right
Application:Part #: 113853585A
Type 1 Convertible Molding Clip Pack of 50
Application:Part #: 151837493
These are wedge to seal the coners on the front door and quarter windows, where the metal frames meet the scrapers.
Application:Part #: 113945110
These reflectors came on the side of the 71-72 Bug tail light housings.
Application:Part #: 111881366
This is the padding that sits on top of the springs of the seat.
Application:Part #: 111821510BGR
The running boards go between the fenders on each side of the car.
Application:Part #: 111129405C
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 1115181
A stock sump plate that has been chromed..
Application:Part #: 1101132
A case saver is an insert that repairs worn or stripped head stud holes in a case.
Application:Part #: 021115175
This screen fits in the sump around the pick up tube.
Application:Part #: 321837581ABK
On Bugs up to 1967 and on Buses up to 1963 you will need to push back the small plastic bezel.
Application:Part #: 1707199
When you take the front and rear bumper assemblies off to install Euro blade bumpers and guards, you're left with holes in the front and rear aprons.
Application:Part #: 211209021D
This pipe comes out of the bottom of your gas tank.
Application:Part #: 251501203E
A new assembly consists of a new axle with CV joints and boots, ready to install.
Application:Part #: 1847492
Rubber End Cap For Safari Slides
Application: