Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:Pan Head Screw for Bus 3 Gauge Pod
Pan Head Screw for Bus 3 Gauge Pod
Bus (Type 2): All
No customer reviews for the moment.
Part #: 1823731
This seal clips on the hood instead of the body.
Application:Part #: 211817205
Roof Repair Rear Corner Outer 3" Wide
Application:Part #: 113611764C
These are the metal brake lines found throughout the car.
Application:Part #: 261829551
These new hinges replace your old worn out or frozen hinges.
Application:Part #: 153863702
This is a full carpet kit.
Application:Part #: 040101149
Oil pick up Pipe
Application:Part #: 1109401
Rocker Arms, High Ratio 1.40 w/Bushing, Set
Application:Part #: N0120561
Accelerator Rod, Clip, 1 required
Application:Part #: 211801404KX
Cargo Floor, outer 11", Right hand side
Application:Part #: 261813300
Truck Corner Louver Section
Application:Part #: 1251005CC
Single Quiet Muffler (Ceramic Coated) Bug (type 1): All Ghia: All
Application:Part #: 111837561
Door Window Lift Channel, Left
Application:Part #: 133419804A
These two rods go from the steering box on a Bug, to the spindles, making the car turn.
Application:Part #: 211945363A
This is the lens that you see on the side of the bus in the front and the rear.
Application:Part #: 111101123
These pins position the main bearings in the case halves so you can line up the oil galley holes with the main bearings.
Application:Part #: 152823509B
The hood catch is what the pin of the hood latch goes into.
Application: