Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:This flex tube goes from the floor pan to the throttle tube on the back side of the fan shroud.
This flex tube goes from the floor pan to the throttle tube on the back side of the fan shroud. This tube is not nessary but it nice to have. By having this tube in place you can usally change your throttle cable with out crawling under the car.
Bug (Type 1): 66-74
Ghia: 66-74
Thing: 73-74
Race/Off-Road: 66-74
No customer reviews for the moment.
Part #: 111837475
The front door window rolls up and down between these two rubber seals.
Application:Part #: 211498211BWG
These spindles have reconditioned king pins and are ready to bolt back on. These spindles will give you the stock ride and give you that lowered stance. They are sold on an exchange basis and come with new king pins. They do NOT come with link pins, so look at yours to see if you need new ones. Most of the time you do not need new ones as they are a...
Application:Part #: 133877209
These are all of the parts that we can get our hands on for metal sunroof bugs.
Application:Part #: VDO333159
VDO has taken it's "through-the-dial" lighting technology and added it to the red pointer by using fiber optics, it's now possible to illuminate the pointer.
Application:Part #: 311903137
This is the belt that turns the generator.
Application:Part #: 153871373A
This is a sleeve that goes in the front window frame for the guide pins to sit in.
Application:Part #: 2129044E
EMPI Dual 44 IDF Carburetor Kit for 2000cc with Air Cleaners
Application:Part #: 141857551AWH
These are the visors you pull down to keep the sun out of your eyes.
Application:Part #: 151837035C
The striker is what keeps the door closed, an absolute necessary part to say the least.
Application:Part #: 113945109
These reflectors came on the side of the 71-72 Bug tail light housings.
Application:Part #: 1251006CC
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 111809086B
Rear Bumper Mount, Right
Application:Part #: 113255355B
This is the hose that goes from the body to the engine.
Application:Part #: N0143893
These are some of the most common clips you will need when putting your car back together.. Approximately 60 needed for both front doors and rear panels
Application:Bug (Type 1): 54-77
Ghia: 56-74
Type 3: 64-74
Part #: 1905451YL
This is a good way to keep your spark plug wires separated.
Application:Part #: 1857100
This durable, plastic box replaces the stock cardboard glovebox.
Application: