Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them. If you are not running larger ports, we suggest you stick with stock gaskets. We've had good luck with the copper gaskets as long as your flanges are flat.
Bug (Type 1): 36hp-1600
Bus (Type 2): 36hp-1600
Type 3: 36hp-1600
Ghia: 36hp-1600
Thing: 36hp-1600
Race/Off-Road: 36hp-1600
No customer reviews for the moment.
Part #: 1251005MRG
Dual Quiet Muffler for Merged Header
Application:Part #: 113251263
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 1251262
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 1251202FL
This is the 3-bolt gasket that goes between the muffler and the header.
Application:Part #: 125121112
Exhaust nuts 12 Point 8mm-1.25, use 10mm 12 point socket (8 per kit)
Application:Part #: 1256092
Also called J-tubes, these tubes fit most header systems and replace the stock heater boxes, so you will lose your heat and defroster..
Application:Part #: 1251211S
HD Racing Exhaust Nuts, 8mm-1.25 thread, 11mm head (Set of 8)
Application:Part #: 1251000
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 1251008H
1 5/8" Merged Flanged Header with Stinger (No Heater Boxes Included)
Application:Part #: 1251163
These fit all stock mufflers and come in three different styles..
Application:Part #: 1251006
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 1251211B
Brass Exhaust Nuts 8mm-1.25 thread, 11mm Head (100 per kit)
Application:Part #: 1251164
These fit all stock mufflers and come in three different styles..
Application:Part #: 1251014SS
Stainless Steel Phat Boy Muffler for Merged Exhaust
Application:Part #: 1251202D
This is the 3-bolt gasket that goes between the muffler and the header.
Application:Part #: 111298051GR
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
