Filter By
Price
Price
$0.00 - $790.00
Part #: N109051
Screws for replacement pop out window frames.
Application:Bus (Type 2): -67
Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window.
Application:Bus (Type 2): -67
Part #: 2847100WH
Safaris let those warm, palmy breezes blow through your bus.
Application:Bus (Type 2): 55-67
Part #: 221847131A
Seals the side popout windows on buses up to 1967.
Application:Bus (Type 2): 50-67
Part #: 211405375
These joints are located in the ends of the control arms.
Application:Bus (Type 2): 68-79
Part #: 111141177AS
These clips hold the throw-out bearing to the arm.
Application:Bug (Type 1): -70
Bus (Type 2): -70
Type 3: -70
Ghia: -70
Race/Off-Road: -70
There are 111 products.
Part #: N154011
These nuts and washers hold the heads on.
Application:Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
Part #: 1101476BWG
Wolfgang Billet Valve Covers There are a few companys making billet valve covers and I have used a few of them and liked them. But we decided to make our own with a few differences.
Application:Part #: 11310140105
If you're rebuilding your own heads, you will probably need guides.
Application:Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
Part #: 11310140102
If you're rebuilding your own heads, you will probably need guides.
Application:Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
Part #: 113101401
If you're rebuilding your own heads, you will probably need guides.
Application:Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
Part #: 11310140108
If you're rebuilding your own heads, you will probably need guides.
Application:Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
Part #: 113101481F
This gasket goes between the valve cover and the head.
Application:Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
Part #: 311198069F
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Bug (Type 1): 1600
Bus (Type 2): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
Part #: 070198169
Rings on the pistons are there to eliminate "blow-by".
Application:Bug (Type 1): 1600
Bus (Type 2): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
Part #: 311198169A
Rings on the pistons are there to eliminate "blow-by".
Application:Bug (Type 1): 1600
Bus (Type 2): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
Part #: 113101355A
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Bug (Type 1): 1600
Bus (Type 2): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
Part #: 113101355ARB
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Bug (Type 1): 1600
Bus (Type 2): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
