Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Bus (Type 2): -67
Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Bus (Type 2): -67
Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Bug (Type 1): 58-64
Bus (Type 2): 55-67
Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:Bus (Type 2): -67
Part #: N139681
This is a list of the most common screws you might need..
Application:Bug (Type 1): 58-64
Bus (Type 2): All
Part #: N107101
This is a list of the most common screws you might need..
Application:Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
There are 7 products.
Part #: 113823565A
This is the handle on the front hood.
Application:Bug (Type 1): 52-67
Offroad/Race: 52-67
Part #: 113823565F
This is the handle on the front hood.
Application:Bug (Type 1): 68-79
Offroad/Race: 68-79
Part #: 111823507A
The hood latch keeps the hood from flying open.
Application:Bug (Type 1): 55-67
Offroad/Race: 55-67
Part #: 111823507F
The hood latch keeps the hood from flying open.
Application:Bug (Type 1): Std, 68-77, SB,71-79
Offroad/Race: 68-77
Part #: 6823566
If you don't like the hood hold downs, you can use hood pins.
Application:Race/Off-Road: All
Part #: 6823564
There are two types of hold downs, rubber and steel.
Application:Race/Off-Road: All
Part #: 6823565
There are two types of hold downs, rubber and steel.
Application:Race/Off-Road: All