Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:KYB's are the best selling monotube replacement shock in the U.S.A..
KYB's are the best selling monotube replacement shock in the U.S.A.. The Gas-A-Just's monotube design and high pressure gas, absolutely eliminate the age old problem of performance fade. This fade is caused in two-tube style shocks, when air is allowed to mix with fluid and it produces foaming. KYB's Gas-A-Just shocks constantly push downward, seeking adhesion to the road. Stock shocks depend on gravity or springs to re-extend them, leaving you with less rubber on the road through turns or bumps. Combine KYB's with heavy duty sway bars for ultimate stability. You might be slow, but you don't have to be blown off the road. KYB's have a lifetime guarantee. We highly recommend KYB shocks and strut inserts.
Bug (Type 1): All
Bus (Type 2): 55-67; lowered,68-79
Type 3: All
Ghia: All
No customer reviews for the moment.
Part #: 1501191RD
This urethane snubber keeps the rear suspension from bottoming out hard.
Application:Part #: 1511227
This cap goes over the torsion bar end of the spring plate holding the grommet.
Application:Part #: 1511242
These grommets go on the spring plates in the torsion housing of your car.
Application:Part #: 1501541
These control arm bushings on IRS control arms are a good way to stiffen up the flex that goes into the arms.
Application:Part #: 1598021BL
These boots are great for your swing axle because they last longer than stock boots.
Application:Part #: 1501205SW
Now you can dial in your suspension in an instant.
Application:Part #: 1511228
This cap goes over the torsion bar end of the spring plate holding the grommet.
Application:Part #: 1511223
Polished Stainless Steel Torsion End Plate, IRS, Pair
Application:Part #: 1511222
Polished Stainless Steel Torsion End Plate, Swing Axle, Pair
Application:Part #: 1501205IRS
Now you can dial in your suspension in an instant.
Application:Part #: 1511245
These grommets go on the spring plates in the torsion housing of your car.
Application:Part #: 1598021BK
These boots are great for your swing axle because they last longer than stock boots.
Application:Part #: 1501243
These spacers go on the axles and are much stronger than the stock spacers.
Application:Part #: 1517289
These seals fit into the CV joint flange to keep the axle from beating the transmission cup and to keep the transmission oil out of the CV joint.
Application:Part #: 1598021YL
These boots are great for your swing axle because they last longer than stock boots.
Application:Part #: 1598021RD
These boots are great for your swing axle because they last longer than stock boots.
Application: