Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
IRS Axles for Type 2 Transmissions with 930 CV Joints or 3x3 Arms, Sold as a Pair
IRS Axles for Type 2 Transmissions with 930 CV Joints or 3x3 Arms, Sold as a Pair
No customer reviews for the moment.
Part #: 1598021RD
These boots are great for your swing axle because they last longer than stock boots.
Application:Part #: 6501205SW
These plates are .250" thick, that means they can handle the abuse of off roading.
Application:Part #: 6501205IRS
These plates are .250" thick, that means they can handle the abuse of off roading.
Application:Part #: 6501205
20 1/4" Axles for Type 2 trans with 930 joints Pair
Application:Part #: 6501281
Billet Aluminum Bearing Cap, Each
Application:Part #: 6501331HK
Porsche Style Lightened 930 CV Joint 108mm OD, .875" Balls, Chromoly, boot, and Flange
Application:Part #: 1511220
Torsion Tube End Plates, Outer, Pair
Application:Part #: 6501149108BO
Overboot Only for 930 CV, Each Offroad applications
Application:Part #: 6501331W
CV Boot Torque Plate (3 per Boot) for 930
Application:Part #: 1511245
These grommets go on the spring plates in the torsion housing of your car.
Application:Part #: 6501149108F
These boots and flanges are designed for axles with very long suspension travel.
Application:Part #: 6511244
These grommets go on the spring plates in the torsion housing of your car.
Application:Part #: 1501243
These spacers go on the axles and are much stronger than the stock spacers.
Application:Part #: 1511227
This cap goes over the torsion bar end of the spring plate holding the grommet.
Application:Part #: 6517283002
These conversion flanges will allow you to run bigger stronger Bus or 930 CV joints..
Application:Part #: 6501200L
Replacement Spiral Locks for 930, Set of 4
Application:
IRS Axles for Type 2 Transmissions with 930 CV Joints or 3x3 Arms, Sold as a Pair
