Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These brackets hold the bumpers on.
These brackets hold the bumpers on. You will need a 13mm socket to pull them on and off of a Bug and a 17mm to get them off a bus.
Bug (Type 1): -67
Offroad: -67
No customer reviews for the moment.
Part #: 133807105B
This is what gets smashed up first in an accident.
Application:Part #: 133807331A
Left rear bumper shock
Application:Part #: 1707302
Stainless Steel Rear Bumper Overrider Set
Application:Part #: 111809085B
Rear Bumper Mount, Left
Application:Part #: 1707134R
If you have a 1968 through 1973 bug and want the eariler style bumpers on it, these are the brackets that will get you there..
Application:Part #: 133807332A
Right rear bumper shock
Application:Part #: 133807346
these plastic caps mount on the ends of the later year bumpers..
Application:Part #: 133807197
These grommets go on the fenders or the body where the bumper brackets go through..
Application:Part #: 111707121A
Bumper Bracket w/ light mounting point
Application:Part #: 133807225
This is the strip of rubber that goes on the center of the bumper..
Application:Part #: 1707103
This bumper is perfect for 1968-73 cars when the turn signals have been shaved off the front fenders.
Application:Part #: 1707135APL
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 6707105
Chrome King Pin Front Bumper
Application:Part #: 111707197B
These grommets go on the fenders or the body where the bumper brackets go through..
Application:Part #: 133807425
This is the strip of rubber that goes on the center of the bumper..
Application:Part #: 1953161
This bumper is perfect for 1968-73 cars when the turn signals have been shaved off the front fenders.
Application:
These brackets hold the bumpers on.
