Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is what gets smashed up first in an accident.
This is what gets smashed up first in an accident. For Buses and Bugs up to 1967, American style bumpers have tubing on the top that tie into the bumper guards. The 1967 and earlier Euro blades have no holes for tubing. Bumpers for Bugs 1968 and later are blade style only.
Bus (Type 2): 59-67
No customer reviews for the moment.
Part #: 211707333
These brackets hold the bumpers on.
Application:Part #: 211707361B
This pan goes between the rear bumper and the body on the corners of your bus..
Application:Part #: 211707362B
This pan goes between the rear bumper and the body on the corners of your bus..
Application:Part #: 211707397B
Bumper Splash Pan Seal, Pair
Application:Part #: 211798003
Rear Bumper Bolt Kit
Application:Part #: 211798005
Splash Pan Installation Kit
Application:Part #: 241707420
Bumper Rubber Insert for Deluxe Bus Bumpers
Application:Part #: 211827905
This bracket holds the license plate to the car.
Application:Part #: 211707135D
Front Bumper Bracket, Left
Application:Part #: 211707311F
REAR BUMPER, 1968-1971 BUS T2 Blade
Application:Part #: 213707195
Spacer between Bolt and Bumper, sold by pair, 1 pair per Bumper
Application:Part #: 211707300
Splash Pan Reinforcement Plates, Set of 2
Application:Part #: 211707335C
Bumper Bracket, Left, Rear
Application:Part #: 213707355A
Rear Bumper Overrider, Left
Application:Part #: 211707397B
Bumper Splash Pan Seal, Pair
Application:Part #: 213707155A
Front Bumper Guard
Application:Part #: 211798003A
Rear Bumper Bolt Kit
Application:Part #: 211707305
This is what gets smashed up first in an accident.
Application:Part #: 211798005B
Splash Pan Install Kit
Application:Part #: 211707291
This is the rubber pads that are on the ends of the front bumper on a 1968-1972 Bus..
Application:Part #: 213707425
Rear Bumper Guard Support Tubes, Pair
Application:Part #: 211707111B
Front Bumper Center Section Only, Primer finish
Application:Part #: 211707362B
This pan goes between the rear bumper and the body on the corners of your bus..
Application:
This is what gets smashed up first in an accident.