Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This seal goes between the body and the engine. On all Bugs and Buses up to 1971 it's a good idea to install it before the engine is in the car. On Buses 72 on, you put it in after the engine is in. This is a very important seal since it keeps the heat exiting the exhaust from entering the cooling fan.
Bus (Type 2): 72-79
No customer reviews for the moment.
Part #: 261827575
This little chrome cover goes on the engine lid for buses up to 1966.
Application:Part #: 111813705A
This seal goes between the body and the engine.
Application:Part #: 211827421
Engine Door Prop, Guide
Application:Part #: 261827711C
It seals the engine lid to keep the air that is forced through the side vents from being sucked out the back and making it go through the fan where it is most needed..
Application:Part #: 261829573
This seal goes around the hinge of the engine lid or single cab side door hinges..
Application:Part #: 211805189
Rear Hatch Prop Rod Buffer, Also Heater Lever rubber buffer
Application:Part #: 211829155
Rear Hatch Rod Bolt
Application:Part #: 251813226A
This seal goes between the body and the engine.
Application:Part #: 111813741G
This seal goes between the body and the engine.
Application:Part #: 261827711
It seals the engine lid to keep the air that is forced through the side vents from being sucked out the back and making it go through the fan where it is most needed..
Application:Part #: 211841635B
Collar, for Cargo door handle and "T" Style rear hatch handle
Application:Part #: 211829191A
Rear Hatch Bead Gasket
Application:Part #: 211827423
Engine Deck Lid Stay Roller (2 required)
Application:Part #: 211827345
Engine Deck Lid Prop Bolt
Application:Part #: N124351
Door Mechanism Clip, Bus Check Rod Pin Clip, Bus Engine Lid Support Roller Mounting Clip
Application: