Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:These are the parts found in the distributor. This is NOT Bosch. Bosch stop making this condenser years ago.
These are the parts found in the distributor. Please refer to the chart (found in the Bus and Bug catalogs)to find which parts fit your distributor. Points are set with a gap of .016" with the point block on a lobe. If you can not find your number, give us a call and we will research it for you.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 04170
These are the parts found in the distributor.
Application:Part #: 1905115
This chrome cover and bracket goes over a coil to dress it up.
Application:Part #: 1905531TA
This ignition system eliminates points, rotor, condenser and even the cap.
Application:Part #: 1905532
This is a cheap knock off of the Compufire Electronic Ignition.
Application:Part #: 113905451A
Ignition Cable Holder
Application:Part #: W7CC
When replacing these use anti-seize on the threads.
Application:Part #: 00012
At this time we are out of stock and have no idea when we will have them back in stock. Please see 00012BRU, it is not as good as this coil but better then a USA coil.
Application:Part #: 01011
These are the parts found in the distributor.
Application:Part #: 03019
These are the parts found in the distributor.
Application:Part #: 113905451
These plastic plugs go into the fan shroud to hold the spark plug wires off the block and heat risers.
Application:Part #: 01001
These are the parts found in the distributor.
Application:Part #: 1B03010RD
These caps look cool and come in different colors, but that's the only good thing we can say about them.
Application:Part #: 1119029
Remote coil mounts are used when you want to keep the coil on the motor, yet out of the way of down linkage on dual carburetors..
Application:Part #: NGK B6ES
When replacing these use anti-seize on the threads.
Application:Part #: 1905451CH
This is a good way to keep your spark plug wires separated.
Application:Part #: 113035255A
The plug wires run from the distributor cap to the spark plugs and coil.
Application: