Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These bumpers are made for Baja Bugs.
These bumpers are made for Baja Bugs. They just bolt on, no welding needed. There are two types of mounting; the firewall mount has stubs that bolt to the firewall and the shock mount bolts to the stock upper shock mount. Both bumpers use the lower frame horn bolts to attach the bottom. Bumpers come with hardware. Shipped by truck only. ****Please call before ordering for shipping options, these are oversize items and can incur a much higher shipping cost than what is quoted on the website****
Off-Road: All
No customer reviews for the moment.
Part #: 651300418
Suspension Limit Straps 18", Pair
Application:Part #: 111801201E
Leftside Rear Cross Member
Application:Part #: 113701571
This seal goes around the plate that's between the front end tubes.
Application:Part #: 6405127
Urethane 2" Long Bump Stops for 1.5" Tube
Application:Part #: 6703113BLK
The offset hole location of the padding allows it to be positioned to provide more protection where you want it.
Application:Part #: 6703022
Show bars are available in 4 point or 6 point style.
Application:Part #: 6701040
3" Body Lift Kit for Bajas and Buggies Shipped by Freight only or Will call pick up!
Application:Part #: 6703021
Show bars are available in 4 point or 6 point style.
Application:Part #: 651300416
Suspension Limit Straps 16", Pair
Application:Part #: 6701061
The skid plate protects the motor and trans.
Application:Part #: 6513005
Limit Strap Clevis (Pair)
Application:Part #: 113701571A
This seal goes around the plate that's between the front end tubes.
Application:Part #: 113898740
These stock replacement tarboards will quiet the interior of the car..
Application:Part #: 6513002
Coil Over Shocks for Link Pin Front, All Rears, All Chrome, Pair
Application:Part #: 651300414
Suspension Limit Straps 14", Pair
Application:Part #: 111899117B
This is a little square pad that goes on the torsion housing where the body mounts.
Application:
These bumpers are made for Baja Bugs.
