Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are reconditioned arms with new ball joints pressed in. They are sold on an exchange basis. If you would like to order these before sending your old arms in, please add part number 211405371WGC to your order. That is the core charge. Once you send back your old arms we will refund that amount, providing your arms are good.
These are reconditioned arms with new ball joints pressed in. They are sold on an exchange basis and come with the alignment eccentrics. Just pull your old arms off and install the new ones. Ball joints are hard to check, especially if they are marginal. To check your ball joints, grab the top of the tire and try to shake it. If the tire moves and you see movement in the ball joint, it needs replacing. ****Due to the lack in cores, we will need your core arms to be sent in advance of a set being shipped out.*******
All steering box cores must be sent first, before we can send you a rebuilt one. Our stock on these are so low that we cannot chance people not sending cores back. Your box must be and “F” box for 68-72 or a “ZE” or “ATE” box for 55-67. We cannot use any other cores, so please check that you have a rebuildable box before sending.
For all other cores, you have two options. You can send in your core first to avoid having to pay the core fee up front when ordering, or, you can pay the core charge and when we get your core in we will credit you back. You can choose to have it refunded to your card or you can have it put as credit on your account toward future purchases. When sending your core to us, please include your full name and telephone number.. You may choose to have your specific item rebuilt and sent back to you, but that must be made apparent when you send in your core.
We will call you after we have received and reviewed your cores. Most of the cores we receive are rebuildable, however, there are a few that are not able to be rebuilt. We will let you know when we call you whether yours are rebuildable or not, and figure out the next step.
Some reasons why your item might not be accepted:
Steering Boxes:
- Bent steering shaft 55-62
- Completely rusted, won’t turn
- Peg & worm destroyed
Spindles:
- Worn out king pin housing
- Bent spindle
- Spindle threads hammered, cut, or modified
Ball Joints:
- Bent
- Bearing surface pitted/destroyed
IRS:
- Bearing surface too bent, modified, broken.
There may be an additional fee if your item is damaged, yet salvageable/repairable.
Steering boxes that are not usable will be sent back and you will need to find another usable core before you can purchase a rebuilt box.
Bus (Type 2): 68-70
No customer reviews for the moment.
Part #: 1707135BCH
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 113945191
This seal goes between the tail light housing and the body of the car..
Application:Part #: 111698131
This kit contains the replacement spring clips and rivets to hold hub caps on.
Application:Part #: 111119571
In the stock front pulley tin, there is a hole for the 1" hose coming down from the stock air cleaner.
Application:Part #: 211953215C
This relay makes the turn signal flash.
Application:Part #: 2601127
"Tuner Style" Chrome Lug Bolts 14mm x 20mm, Set of 5 w/ Tool
Application:Part #: 211953226
Emergency Flasher Relay
Application:Part #: 2501102CO
CORE CHARGE
Application:Part #: T2501615
This is a great little tool for getting the rear axle nut off.
Application:Part #: 6251014CL
SS Racing Muffler Replacement Mounting Clamps
Application:Part #: N185301
These fittings fit on the front end so you can pump grease in the front suspension..
Application:Part #: 111721529A
Accelerator Pedal Pin Kit
Application:Part #: 151847325A
Hinge Pin For Quarter window, Convertible
Application:Part #: 186360311
These ride on the tunnel from the shifter forward.
Application:Part #: 151871353C
This seal goes on the windshield post to seal the vent wing.
Application:Part #: 1698152
This kit allows you to run disc brakes in the rear.
Application:
These are reconditioned arms with new ball joints pressed in. They are sold on an exchange basis. If you would like to order these before sending your old arms in, please add part number 211405371WGC to your order. That is the core charge. Once you send back your old arms we will refund that amount, providing your arms are good.