Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Some of the most common studs you might need.
Some of the most common studs you might need. The best way to get a stud in or out is to double nut it. Take one nut and tighten it against the other and screw the stud in or out.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: N185112
These fittings fit on the front end so you can pump grease in the front suspension..
Application:Part #: 1109651
We have had good luck with stock keepers on single springs.
Application:Part #: 251407629
This is the seal for the front wheels.
Application:Part #: 111857131L
Locking Glove Box Latch w/keys
Application:Part #: 113105245FS
This seal goes behind the flywheel.
Application:Part #: 133945096H
This assembly comes with the bulb holder and lens.
Application:Part #: 1109336
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:Part #: 153863710
This is a full carpet kit.
Application:Part #: 022109612A
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head.
Application:Part #: 151845521ECL
This seal is for the rear window. This is for a CONVERTIBLE ONLY.
Application:Part #: 1251262
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 211837211A
This seal goes between the handle and the body.
Application:Part #: 1115464
This air filter is made to protect the crankcase.
Application:Part #: 113819543
Fresh Air Box Drain Hose
Application:Part #: 1198026A
This kit contains a quality urethane bushing, a clutch return spring and retaining clips needed to install the throw-out bearing arm in the transmission.
Application:
Some of the most common studs you might need.
