Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N141212
These are the latches that hold the popout frame out.
Application:These brake pads go into the calipers and are sold in sets of four; two per caliper.
These brake pads go into the calipers and are sold in sets of four; two per caliper. Sold with no exchange.
No customer reviews for the moment.
Part #: 211837605D
Complete Vent Window Assembly, Left
Application:Part #: 113863110
These are the interior panels.
Application:Part #: 213707225
Bumper Guard Support Tubes, Front, Sold as a pair
Application:Part #: 113863703A
Black Over the Tunnel Floor Mat
Application:Part #: 211259369A
Fresh Air Lever, Blue
Application:Part #: 1845101KWG
Bug Safari Glass ONLY
Application:Part #: 211837225ACH
Front Inside Door Handle Chrome w/hole
Application:Bus (Type 2); 64-66
Part #: 1109451
This style of adjusting screw has a ball with a flat side on the end.
Application:Part #: 113129707A
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 211863000
Black Plastic Door Pockets (Pair)
Application:Part #: 1511228
This cap goes over the torsion bar end of the spring plate holding the grommet.
Application:Part #: 6707102CH
These bumpers are made for Baja Bugs.
Application:Part #: 1301048
These straps are a good idea if you have a car with a big engine. We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 211837205N
These are the front door handles.
Application:Part #: 211498041BR
Kits contain the pins, bearings and shims which attach the spindle on king and link front ends to the axle beam.
Application:Part #: 141871200A
Convertible Top Pad Kit
Application: