Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The main reason to replace these clamps is because you've destroyed the old ones getting them off.
The main reason to replace these clamps is because you've destroyed the old ones getting them off. To put the new ones on, use a large pair of channel lock pliers to squeeze the band together and then slide the clip on. Once the clip is all the way on, bend the tab down. It is harder than it sounds.
Bug (Type 1): SB,71-73 1/2
No customer reviews for the moment.
Part #: 111809635E
Rear Bumper Mount, Brazilian Universal
Application:Part #: 111198551
This kit allows you to rebuild your fuel pump.
Application:Part #: 111941119
This seal goes in the headlight buckets.
Application:Part #: 068141025D
The clutch cover is also known as a pressure plate.
Application:Part #: 141564613
This steering wheel is a very cheap steering wheel in comparison to the Leccara wheels.
Application:Part #: 211721361D
This tube goes from the metal tube coming out of the tunnel to the bracket on the transmission.
Application:Part #: 1101130
A case saver is an insert that repairs worn or stripped head stud holes in a case.
Application:Part #: 211798003
Rear Bumper Bolt Kit
Application:Part #: 2711101
Gear shift extensions angle back and add about 5" of length to your stock shifter, which allows you to reach the shifter without leaning forward..
Application:Part #: 1117103
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 261809041D
Left Side Panel No Storage Compartment
Application:Part #: 211405681
This plate goes between the two nuts on each of the front spindles.
Application:Part #: 113853535CSL
Body Molding Kit
Application:Part #: 025109451
Valve Adjusting Screw 9mm
Application:Part #: 113105241A
This is a large concave washer that goes on the crank after you have the nose bearing on.
Application:Part #: 211845121A
This seal goes around the front window.
Application:
The main reason to replace these clamps is because you've destroyed the old ones getting them off.
