Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This kit contains the replacement spring clips and rivets to hold hub caps on.
This kit contains the replacement spring clips and rivets to hold hub caps on. Drill out the old rivet and remove what is left of the old clip. We suggest you pitch the rivets that come in the kit and use a pop rivet instead.
Bug (Type 1): -65
Bus (Type 2): -70
Type 3: -65
Ghia: -65
Thing: 73-74
No customer reviews for the moment.
Part #: 321201551H
The most common reason, for replacing a cap is forgetting to put it back on at the gas station.
Application:Part #: 6823502A
These fasteners take some time to put in, but they're worth the effort. Spring Retainer 1.4"
Application:Part #: 6615114R
Rear Disc Brakes Kit Jamar 5x205 4 Piston Calipers
Application:Part #: 261809042CX
Right Side Panel with Storage Compartment on Right hand Side
Application:Part #: 113819635A
These are the vents that clip into the dash.
Application:Part #: 02039
These are the parts found in the distributor.
Application:Part #: 211611805H
Brake tube
Application:Part #: 111837418
Window guide channel at the rear of the door, Right side
Application:Part #: 211801051IR
This area tends to rust.
Application:Part #: 111721507B
This is the pedal that works the throttle.
Application:Part #: 111405627
These bearings go in the drum or rotor hub to allow them to spin.
Application:Part #: 1711149A
This kit contains a stock style shifter and shift plate.
Application:Part #: 1109451
This style of adjusting screw has a ball with a flat side on the end.
Application:Part #: 1601057
Empi Corsa, Gun Metal Grey w/ Polished Lip, 5x205, 15x5.5"
Application:Part #: 1198026A
This kit contains a quality urethane bushing, a clutch return spring and retaining clips needed to install the throw-out bearing arm in the transmission.
Application:Part #: 1101392
Whether your motor lives or not can depend upon this little shim.
Application:
This kit contains the replacement spring clips and rivets to hold hub caps on.
