Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the rear lenses for the tail light, brake light and turn signal light.
These are the rear lenses for the tail light, brake light and turn signal light. They are held in place with two to three Phillips screws.
Bug (Type 1): 62-67
No customer reviews for the moment.
Part #: 111945116
This seal goes between the tail light housing and the body of the car..
Application:Part #: 111945191E
This seal goes between the tail light housing and the body of the car..
Application:Part #: N141341
These are the rear lenses for the tail light, brake light and turn signal light. Set of 4 Screws for 62-67 Bug taillight lens and 68-72 Bus front turn signal lens to body
Application:Part #: 111945185
Taillight/Turn Signal Screw
Application:Part #: 111945263F
Taillight Bulb Holder, each
Application:Part #: JC44510
Jaycee Shorty Billet IDA Stacks, Black, Each
Application:Part #: 133807225
This is the strip of rubber that goes on the center of the bumper..
Application:Part #: 133823719
This is the seal that goes on the body for the front hood to sit on.
Application:Part #: 211919051
The sending unit registers the fuel level on the gauge.
Application:Part #: 113845321AAM
This seal goes around the side window that is stationary (does not have a frame).
Application:Part #: 241885000
Rear Seat Support Bar, Clamps and bar
Application:Part #: 211721621
This boot keeps air from coming up threw the floor where the accelerator rod goes threw the floor.
Application:Part #: 113101353BRB
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld). Due to a shortage of cores we will need your Cylinder head Cores before sending any Rebuilt heads.
Application:Part #: NGK D7EA
This Spark plug is only used for Racing or Competition vehicles due to the size of the Spark Plug; Dimensions Below Thread Pitch: 12mm x 1.25mm, Thread Length: 19mm (3/4") Verify that the Thread Pitch and length is compatible with your heads if you have any questions call and ask prior to ordering.
Application:Part #: 111903221A
These are the bearings and brushes for your generator.
Application:Part #: 1881051
We really like the style and comfort that these seats provide.
Application:Part #: 111837571
Door Window Lift Channel
Application:Part #: 1129310
Empi Idle Jet Vent Tube Kit
Application:Part #: 144863706
This is a full carpet kit.
Application:Part #: 251829332
This strut is what holds up the rear hatch of you Vanagon.
Application:Part #: 111899165
Rear Shock Tower Washer
Application:
These are the rear lenses for the tail light, brake light and turn signal light.
