Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The striker is what keeps the door closed, an absolute necessary part to say the least.
The striker is what keeps the door closed, an absolute necessary part to say the least. They are held in place by large screws. We suggest you use an impact drive to get the striker out. Note: Use masking tape to mark two sides of the old striker, so you will know where to set the new one. Before you completely tighten down the new striker, close the door and see how it lines up. If it lines up, tighten the screws. If it doesn't, start making adjustments until it does.
Bug (Type 1): 60-66
Race/Off-Road: 60-66
No customer reviews for the moment.
Part #: 113415813
These are the ball joints on the tie rods.
Application:Part #: 311012243
This is a slick tool for getting your hub caps off.
Application:Part #: 215703706A
These large panels box in the frame on buses with sunroofs or door on both sides.
Application:Part #: 111943023B
This housing mounts on the deck lid to hold the light assembly for the license plate.
Application:Part #: 113255355M
This is the hose that goes from the body to the engine.
Application:Part #: 1251000
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 1105425
These connecting rods are longer than stock.
Application:Part #: 221863010
These are the interior panels.
Application:Part #: 1615106F
Replacement Front Brake Rotor Blank, for Ball Joint Front end
Application:Part #: 211798003
Rear Bumper Bolt Kit
Application:Part #: 1117011
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: 1117010
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: 211845521
This seal is for the rear window.
Application:Part #: 211837571A
Window Lift Channel, fits both sides
Application:Part #: 311109335
These tubes go from the case to the heads to house the push rods.
Application:
The striker is what keeps the door closed, an absolute necessary part to say the least.
