Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This kit allows you to bolt disc brakes onto your Bug king and link pin or ball joint front end.
This kit allows you to bolt disc brakes onto your Bug king and link pin or ball joint front end. The kit comes with rotors, calipers, seals, lock tabs, and mounting bolts. Non lowered kits also come with front wheel bearings. If your Bug is a 66 or earlier, you'll need the master cylinder off a 1967 or later Bug. Also the reconditioned spindle kit is sold on an exchange basis. We do not recommend front disc brakes on off road cars, because you'll get in a lot of trouble in the dirt unless you have some kind of proportioning valve.
Bug (Type 1): -65
Ghia: -65
No customer reviews for the moment.
Part #: 113407075BR
This is the front brake rotor that the pads ride against on disc brake front ends.
Application:Part #: 311615107BR
Front calipers hold the brake pads that stop the rotor, which in turn stops your vehicle.
Application:Part #: 1698152N
Premium Brake Pads for Caliper # 311615107BR
Application:Part #: 1698152A
Replacement pads for 3116151070BR
Application:Part #: 1129605
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 113117303
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1109338
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:Part #: 211721631A
This linkage lever hooks to the accelerator cable under the front of your bus.
Application:Part #: 113255965
Vent Cover Securing Clips
Application:Part #: 111955339A
Wiper Assembly Spring
Application:Part #: 211498211BCO
CORE CHARGE If you would like to order these before sending your old spindles in, please add part this to your order. This is the core charge. Once you send back your old spindles we will refund that amount, providing your spindles are good.
Application:Part #: 251857514
These mirrors mount on the doors or door hinges so you can see what's behind you.
Application:Part #: 1101025
Mag Case bored to 90.5
Application:Part #: 111401315
Torsion Arm Bushing, 8 Per Car
Application:Part #: 111943191A
This is the lens and seal for the light that shines on the license plate.
Application:Part #: 1711143BK
These knobs with the Empi logo are made to fit all stock shifters.
Application:Part #: 62010728
Spun aluminum gas tanks for Buggies, come with either end fill or center fill option.
Application:Part #: 1117109
This block off plate is made to loop the oil back into the case in place of the stock oil cooler.
Application:Part #: 111955541BK
These are the knobs for the wiper and light switches on the dash.
Application:Part #: 111863705
This is a full carpet kit.
Application:
This kit allows you to bolt disc brakes onto your Bug king and link pin or ball joint front end.