Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These rubber stops keep the glove box or gas door from slamming into the body.
These rubber stops keep the glove box or gas door from slamming into the body. To install them, just pull the little nubs throught the hole with a pair of pliers.
Bug (Type 1): Gas door stops, 68-79, Glove box door stops, 53-77
Bus (Type 2): Gas door stops, 55-79
Type 3: Gas door stops, 68-74, Glove box door stops, 62-74
Ghia: Gas door stops, 68-74, Glove box door stops, 56-74
Off-Road: Gas door stops, 68-79, Glove box door stops, 53-77
No customer reviews for the moment.
Part #: 221847081C
These are the latches that hold the popout frame out.
Application:Part #: 1511228
This cap goes over the torsion bar end of the spring plate holding the grommet.
Application:Part #: 211837205N
These are the front door handles.
Application:Part #: 241853547
These are the clips that hold the various chrome moldings on.
Application:Part #: 1615104
Front Disc Brake Kit, Ball Joint, Double drilled 5x130 w/14x1.5mm threads or 5x4.75" with 12mm threads
Application:Part #: 153863010
These are the interior panels.
Application:Part #: 1117021
Mesa coolers are the state of the art oil coolers.
Application:Part #: JC86110
Jaycee Billet 6" Crank Pulley for Offroad Cars, Silver
Application:Part #: 113129323B
Here are some of the replacement parts for your stock carburetor.
Application:Part #: 6501149108F
These boots and flanges are designed for axles with very long suspension travel.
Application:Part #: 1905451YL
This is a good way to keep your spark plug wires separated.
Application:Part #: 1109453EA
Replacement Adjustment Screw and Nut for Ratio Rockers
Application:Part #: 111863121
These are the interior panels.
Application:Part #: 265867200
Crew Cab Passenger area Panels, Original smooth texture 3 piece kit
Application:Part #: 133415303
These two rods go from the center tie rod on a Bug, to the spindles, making the car turn.
Application:Part #: 311405625B
These bearings go in the drum or rotor hub to allow them to spin. German
Application:
These rubber stops keep the glove box or gas door from slamming into the body.
