Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This cable pulls the arm that releases the clutch. When replacing the cable, it will last longer and work better if you use white grease on it and on the clevis pin or hook. The easiest way to replace a cable is to remove the nut(s) from the clutch arm at the trans. Pull the bowden tube out of the bracket so it is straight. Pull the cable out from the front and replace it in the reverse order. On 68-71 Buses a two bolt bell where the clutch pedal shaft is bolted to the frame will need to be removed to get to the clevis pin. It is good idea to replace the clevis pin at this time on buses. We recomend having a spare in the car, in case it breaks while out in the middle of nowhere.
Bus (Type 2): 68-71
No customer reviews for the moment.
Part #: 111405641A
These are the inner bearing seals on the drums or rotors.
Application:Part #: 113101353BCO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 241863711E
This rubber mat goes on the front floor.
Application:Part #: 6415060C
This is a replacement cover for your stock steering box.
Application:Part #: 1405314
Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard.
Application:Part #: 151871351A
These strips screw to the top.
Application:Part #: 111881717
These are covers for the seat headrests.
Application:Part #: 1105401A
These connecting rods are longer than stock.
Application:Part #: 111109301A
These rods link the cam to the valves.
Application:Part #: 1119303CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 1601150NRC
Replacement Cap, Chrome with Logo
Application:Part #: VDO240036
VDO offers a variety of mounting bracket to choose from..
Application:Part #: 311863411
This carpets the area behind the rear seat.
Application:Part #: 231070700
This holds the pop top down on campers..
Application:
