Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Vent Window Assembly, Left
Vent Window Assembly, Left includes assembled frame latch, rain gutter, and glass
No customer reviews for the moment.
Part #: 04004
These are the parts found in the distributor.
Application:Part #: 151883403
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 111805501B
This clip goes back to the gas tank area.
Application:Part #: 6707301
These bumpers are made for Baja Bugs.
Application:Part #: 1129201300
EPC 48/51 3.0 Needle and Seat IDA 300
Application:Part #: 221955425C
These are our good quality bus wiper blades, we suggest using these ones over others. Because the earlier blades are so rare and expensive we suggest you take them off in the summer.
Application:Part #: EFH930
ECP part numbers are for the regular crimp style electrical ends.
Application:Part #: 211837225B
Inner Front Door Handle, (silver beige)
Application:Part #: 111941185
These are the rubber tubes the headlight wires go through.
Application:Part #: 113863505
This is the replacement cardboard liner for under the front hood.
Application:Part #: 143847341
Quarter Window Upright Seal Pair
Application:Part #: 117877366A
These are all of the parts that we can get our hands on for metal sunroof bugs.
Application:Part #: 1601063CH
Empi 4 Spoke, Chrome, 4x130, 15x5.5"
Application:Part #: 1117109
This block off plate is made to loop the oil back into the case in place of the stock oil cooler.
Application:Part #: 111821021P
These new front fenders are not as thick as the original German fenders.
Application:Part #: 1117022
Mesa coolers are the state of the art oil coolers.
Application:
Vent Window Assembly, Left
