Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Front Hood Stops
Front Hood Stops, These just screw in. you can screw them in or out to get them to rest against the hood right.
No customer reviews for the moment.
Part #: 211813356G
Rear Lower Corner, Right, 250mm (9.8") high
Application:Part #: 151871400
Convertible Top Chrome Molding Kit
Application:Part #: 113863700
These rubber mats go on the front and rear floors.
Application:Part #: 113955407B
The arms extend from the shaft to hold the wiper blades, very rarely do they fail..
Application:Part #: 261809591
Inner Rocker Strengthener goes Between Inner and Outer Rocker Panels
Application:Part #: 6721357
Heim End for EMPI Slave with 3/8" Ball
Application:Part #: 113101355A
New dual port head
Application:Part #: 311853535C
Chrome Aluminum Molding Kit, 8 Piece without Side Marker
Application:Part #: 1411300AL
These heavy duty sway bars help eliminate swaying.
Application:Part #: 215703705A
These large panels box in the frame on buses with sunroofs or door on both sides.
Application:Part #: 6129651R
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element.
Application:Part #: 1707135ACH
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 1615107
Replacement Rear Brake Bracket for Kit # 1615108
Application:Part #: 251611243
Seal between Master Cylinder and Brake Booster
Application:Part #: 211501303
Reduction box, Rear Axle Bearing Spacer, 1 per side
Application:
Front Hood Stops