Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Bumper Guard Support Tubes, Front, Sold as a pair
Bumper Guard Support Tubes, Front, Sold as a pair
Bus (Type 2): 1959-67
No customer reviews for the moment.
Part #: 221817847
Air Distribution Knob, Silver Beige
Application:Part #: 111905449A
These seals keep dirt out and air flowing over the cylinders on your shrouds.
Application:Part #: 113898806
Rear Cargo Area Insulation Kit
Application:Part #: 111105235A
These are the shims that set the endplay of the distributor drive gear.
Application:Part #: 2847100SS
Safaris let those warm, palmy breezes blow through your bus.
Application:Part #: 1115420
This is one way to adjust your oil pressure.
Application:Part #: 211863010
These are the interior panels.
Application:Part #: 2831000
These fit on the front doors giving a little shade.
Application:Part #: 211957805
This cable goes from the speedo to the driver side front wheel.
Application:Part #: N109701
This pack of hardware is for door window assembly on buses up to '67. Each pack is good for one door window.
Application:Part #: 141881406
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 111899117B
This is a little square pad that goes on the torsion housing where the body mounts.
Application:Part #: 111405273
These are the rubber snubbers that are in between the front torsion bar arms.
Application:Part #: 1129518
These Stainless Steel Linkage Arms will not Flex or Bend under the most demanding circumstances.
Application:Part #: 111201261
Fuel Breather Hose Clip
Application:Part #: 1117108
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:
Bumper Guard Support Tubes, Front, Sold as a pair