Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Lower Inside Rear Hatch Seal, Squareback
Lower Inside Rear Hatch Seal, Squareback
Type 3: 1961-73
No customer reviews for the moment.
Part #: 211611775B
This flex hose goes from the metal brake line on the rear fork to the metal brake line on the axle tube.
Application:Part #: 111298007
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 151847345B
These scrapers found on convertibles are for the rear quarter windows.
Application:Part #: 6601002WH
These are the most popular off road wheels.
Application:Part #: 311941195
Plastic Nut, Set of 4 for 2 Headlights
Application:Part #: N185101
These fittings fit on the front end so you can pump grease in the front suspension..
Application:Part #: 113823461A
This handle is on end of the cable that releases the gas door.
Application:Part #: 1501621
Aluminum Wheel Spacer, Double Drilled 4x130 & 5x130; 3/8" Thick
Application:Part #: 1601141FCH
Silver Center Cap with EMPI Logo, Cap Only
Application:Part #: 111899117B
This is a little square pad that goes on the torsion housing where the body mounts.
Application:Part #: 211809102B
This is what everyone cut out in the 60's.
Application:Part #: 1511222
Polished Stainless Steel Torsion End Plate, Swing Axle, Pair
Application:Part #: 1117101
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 211943165
This holds the bulb for the license plate in the engine deck lid.
Application:Part #: 1105720
Chevy Rod Bearings STD
Application: