Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Long Wheel Studs, M14-1.5 on both ends, Set of 5
Long Wheel Studs, M14-1.5 on both ends, Set of 5
Race/Offroad: All
No customer reviews for the moment.
Part #: 1615108ADLX
Rear Disc Brake Kit W/O E-brake, 4x130, IRS, HD Cast Brackets
Application:Part #: 111881281
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first.
Application:Part #: 211827025B
Engine Deck Lid
Application:Part #: 113863515B
Wiring Cover
Application:Part #: 151871093B
Bow, Above Rear Window, Convertible only
Application:Part #: 113127521AWG
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 131415802E
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 311863411
This carpets the area behind the rear seat.
Application:Part #: 111821021P
These new front fenders are not as thick as the original German fenders.
Application:Part #: 211845121DAM
This seal goes around the front window.
Application:Part #: JC44470
Jaycee Billet IDA Stacks, Blue, Each
Application:Part #: 1198026A
This kit contains a quality urethane bushing, a clutch return spring and retaining clips needed to install the throw-out bearing arm in the transmission.
Application:Part #: 113881177
Camber Detent Springs, Pair
Application:Part #: 1115449BL
Replacement Oil Cap Billet Blue
Application:Part #: 211298009A
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:
Long Wheel Studs, M14-1.5 on both ends, Set of 5