Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Heater Control Knob, Red
Heater Control Knob, Red
No customer reviews for the moment.
Part #: 151845121ACL
This seal goes around the front window.
Application:Part #: 6857050A
This panel goes across the whole dash.
Application:Part #: 251829231
This lock goes on the rear cargo door.
Application:Part #: 211721629
Pivot Pin for Accelerator Pedal Hinge
Application:Part #: 1109617
Single Spring Shims, .060" 8 piece
Application:Part #: 211707300
Splash Pan Reinforcement Plates, Set of 2
Application:Part #: 113251053
40 HP Stale air Muffler
Application:Part #: 1955441BIL
Billet Radio Knobs, Push-on, Pair
Application:Part #: 311867500
This is the vinyl covering for the inside roof and sides of the Square Back.
Application:Part #: 113819515
Foam Seal Pair for Fresh Air Box Flap
Application:Part #: 6615103B
Rear Rotor for Disc brake setup, 4x130 bolt pattern, 14x1.5mm threads
Application:Part #: 113127521AWG
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 6415619
This billet aluminum steering wheel is precision machined and finished polished for a real shine.
Application:Part #: 6801113
These tabs are used for mounting just about anything to tubing..
Application:Part #: 311101353ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:
Heater Control Knob, Red
