Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Clutch Pedal Rubber Stop
Clutch Pedal Rubber Stop
Bus (Type 2): 68-79
No customer reviews for the moment.
Part #: 111837629
This seal goes on the back side of the front door vent wing.
Application:Part #: 251711629
Heater cables open the flaps in the heater boxes allowing heat into the car.
Application:Part #: F1140P
PennGrade 40w
Application:Part #: 6941046
These are the headlight shells you would use on a Manx style or tube car..
Application:Part #: 241898001
These polished replacement kits are designed to fit the original contour molding profile.
Application:Part #: 1129601EL6
This is a replacement air cleaner for the Weber IDF.
Application:Part #: VDO310039
These are VDO's most popular gauges and the ones that made VDO famous.
Application:Part #: 151871093B
Bow, Above Rear Window, Convertible only
Application:Part #: 113101353BRB
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld). Due to a shortage of cores we will need your Cylinder head Cores before sending any Rebuilt heads.
Application:Part #: 111821531ATN
Tan Running Board Material, Left
Application:Part #: 1105253BK
This is a crank pulley for an upright motor.
Application:Part #: 6801211
These tabs are used for mounting just about anything to tubing..
Application:Part #: 111831449
These grommets are for the tail light wires to go through.
Application:Part #: 211837626
Vent wing seals on the front doors keep out the elements.
Application:Part #: 803201511E
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
Application:Part #: 1411108
2" Narrowed Leaves for Ball Joint, 1 Set (2 sets required)
Application:
Clutch Pedal Rubber Stop