Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Brake line grommet
This is the brake line grommet that goes in the rear IRS arm for the metal brake line that goes to the rear wheel cylinder. Sold each. There is one on each arm
No customer reviews for the moment.
Part #: 315953161D
These are the lenses that go over the front turn signal bulb holders.
Application:Part #: 111998161B
The wiper arms are connected to these shafts.
Application:Part #: 111953041MT
Weld on Mount for Bullet Turn Signal Assembly
Application:Part #: 111698700
Steel Brake Line Kit (7 Pieces)
Application:Part #: 211853615
These are three little plastic pieces that push into the front hood to hold the emblem in place.
Application:Part #: 151837627
For convertibles, this is the upper pin that the vent wing pivots on.
Application:Part #: 211945241RK
This assembly comes with the bulb holder and lens.
Application:Part #: 6415616A
This unit is used when you want to take the steering wheel off in a hurry.
Application:Part #: 211837235ABK
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 1601103A
Screw in Wheel Studs M14-1.5 commonly found in 5x130 applications
Application:Part #: 211598200A
Spring Plate Cover Hardware Kit
Application:Part #: 111971113
The electrical harness runs everything on the car.
Application:Part #: 211863012
These are the interior panels.
Application:Part #: 6801240
Universal Billet Support Bracket, 1 1/2" clamps, measures 4 7/16"L x 3"H x 2 1/2"W
Application:Part #: 113827902
License Plate Bracket
Application:
Brake line grommet
