Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Body molding kit stainless steel
This is the body molding kit that goes on the side of your Super Beetle. Its a 7pc kit.
No customer reviews for the moment.
Part #: 1251202FL
This is the 3-bolt gasket that goes between the muffler and the header.
Application:Part #: 131405670
This nut holds the front drum on.
Application:Part #: 1109615
Single Spring Shims, .015" 8 piece
Application:Part #: 111857706RD
It's the law and a good idea to have seat belts.
Application:Part #: 1127110ALM
This is stainless steel braided fuel line.
Application:Part #: 113251265
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 311115541
This boot goes on the end of the dump tube.
Application:Part #: 112701062Q
Floor Plate, Right
Application:Part #: 241845621
They seals go around the small windows on the roof of 21 and 23 window buses up to 1967.
Application:Part #: 315853322A
Outside Door Scraper Right
Application:Part #: 111857513K
These mirrors mount on the doors or door hinges so you can see what's behind you.
Application:Part #: 211707001AM
Complete Front Bumper assembly MINUS mounting brackets, coated in primer
Application:Part #: 1251200
This kit comes with four flanges, two for the heater boxes and two for the header. Sold EACH, 2 required.
Application:Part #: 141971017
The electrical harness runs everything on the car.
Application:Part #: 1721362
Bolt-on Bowden Bracket, Zinc, Swing Axle + IRS
Application:
Body molding kit stainless steel