Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Parking brake lever
This is what the Ebrake cable hooks to in order to spread the rear shoes out.
No customer reviews for the moment.
Part #: 1817022HD
This is a cover that goes over the whole car.
Application:Part #: 021127303A
The fuel pump sits on this little stand and it's also the guide for the push rod.
Application:Part #: 025101345B
Chamber to Cylinder Head Seal
Application:Part #: 6801199
Threaded bung, 3/4"-16 RH, 1"x.120, 2 3/8" Long
Application:Part #: 311133511C
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
Application:Part #: 211609701C
Emergency Brake Cable (3330mm/131.1")
Application:Part #: 213707425
Rear Bumper Guard Support Tubes, Pair
Application:Part #: 1845201B
This kit comes with everthing you need to eliminate your vent window, tempered glass, felt window channels, inner and outer snap in scrappers.
Application:Part #: 151871383D
This is what holds the top closed.
Application:Part #: 6251011
Systems are designed for max horsepower and to handle the punishment of off-road competition.
Application:Part #: 111415543
Steering Column Upper Lock Plate
Application:Part #: 133823731B
This is the seal that goes on the body for the front hood to sit on.
Application:Part #: 113109345A
These are the seals that go around the push rod tubes.
Application:Part #: 113101353BRB
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld). Due to a shortage of cores we will need your Cylinder head Cores before sending any Rebuilt heads.
Application:
Parking brake lever
